Skip to main content

Brio Clinical Labs

Updated

This feature is available for Lobbie EMR customers in the United States.

Overview

Lobbie now supports integration with Brio Clinical Laboratories. Contact Brio Clinical to set up an account with them, if you have not already established an account. Once established, the integration can be configured.

Brio Configuration

Requirements

A valid Brio sitecode ID is required for each location This value is issued by Brio, and we can not configure the integration without the id.

⚠️ Clinics must contact Brio first — Lobbie cannot issue Brio IDs.

Settings

Generally, configuration will be handled by Lobbie support, but you can view and confirm the configuration within Lobbie Settings, if desired. We recommend not making any changes to the lab vendor configuration without first contacting Lobbie support.

  1. Go to Lobbie Settings → Labs → Vendors
  2. For the Brio entry, select View/Edit
  3. If you have a single location on your account, the External ID will be configured with the Brio sitecode ID
  4. If you have multiple locations on your account, each Location will have a Location Config
    1. For each location, the External ID will be configured with the location specific Brio sitecode

Panel Configuration

Brio lab tests and panels are managed by Brio, and these are only editable by Lobbie support. Brio Clinical provides Lobbie the test compendium data and we will upload it directly into your account. If you feel there are some test configurations that need updating, please contact supprt@lobbie.com.

Creating a Lab Order

Creating a lab order follows a very similar flow as other lab entry flows. Please watch the video below for more information.

From Patient Appointment Detail

  1. From a patient’s record, navigate to Appointments
  2. Expand/find the patient encounter/appointment to link the lab order
  3. Click on Add Labs -> Order Labs (see image)
  1. Select Brio from the Vendor select field
  2. Fill in the relevant information for the lab order
    • Collection Date and Collection Time
    • Physician Number (auto populated if an appointment is selected)
    • Patient Ethnicity
    • Patient Race
    • Select Test Packets and/or Test Panels
  3. Select Confirm and Place Order

Requisition Form

Once an order is placed you can retrieve the requisition form in two ways

  • By opening the lab order in the Lab View Drawer
  • Under Labs in the Patient Detail view, you can click on the PDF button for the respective lab order

Lab Results

  • Lobbie will receive lab results electronically directly from Brio
  • Results will automatically be updated into the lab order
  • You may view lab results similarly to viewing the Requisition Form above

Related articles